Environmental and gas monitoring guidance for audited field teams
Application note

Why I Buy SICK Encoders and Fluke Multimeters From Specialists, Not 'One-Stop' Suppliers

2026-11-20 Sofia Lindberg
Measurement team reviewing calibrated environmental monitoring data

Here's the short answer: when you're buying a SICK wire draw absolute encoder, a SICK programmable encoder, or a Fluke true RMS multimeter, buy from a distributor who specializes in that product category—not from the one-stop supplier who claims to stock "everything for the plant floor." The vendor who tells you "we don't carry that, but here's who does" will save you more time and money than the one who says yes to every part number.

I'm an office administrator for a 220-person manufacturing company. I manage all MRO and instrumentation ordering—roughly $400,000 a year across 11 vendors—and I report to both operations and finance. I'm not an engineer. But I've learned where the engineering questions live, and which suppliers answer them straight.

The order that made me rethink "one-stop"

In 2023, we added a second packaging line and needed a wire draw encoder for a tension arm. Our controls engineer specified a SICK model. I did what I usually do: pulled up our main general-line distributor's catalog, found something listed as an "equivalent," and ordered it to save a PO.

It arrived with the wrong interface—analog instead of SSI. The return took about three weeks—or rather, closer to four once the credit memo cleared. Our controls engineer borrowed a unit from another plant in the meantime, which meant driving 90 minutes each way. Finance asked why the original PO had a restocking fee. I didn't have a good answer.

That was the last time I treated an encoder as a catalog item.

What a specialist asks you about a SICK wire draw encoder

When I called a specialist distributor the second time around, the first question wasn't "how many do you need?" It was "what interface does your controller accept?" Then: measuring range, wire draw length, IP rating, and whether the mounting orientation had any clearance issues.

According to SICK's product documentation (sick.com), a wire draw encoder combines a measuring wheel with a rotary encoder to convert linear motion into an absolute position value. That sounds simple in a datasheet. In practice, the interface and the mechanical integration are where orders go wrong—and where a general-line sales rep runs out of answers.

The specialist also flagged something I wouldn't have caught: our original spec used a model with a shorter wire draw length than the actual travel distance. Nobody at the general distributor had asked about travel distance. The specialist did.

Even after placing the order with the specialist, I kept second-guessing. What if the general supplier's unit would have worked fine and I just paid 8% more for hand-holding? The two weeks until delivery were stressful. Didn't relax until the encoder was installed and the line ran through a full shift without a fault.

Programmable encoders: the question that separates vendors

We also needed a SICK programmable encoder for a retrofit on an older conveyor. The appeal of a programmable unit is that you can set resolution and output parameters in the field instead of ordering a fixed configuration and hoping it matches.

Here's the test I now use: I ask the sales rep whether the encoder's resolution can be changed on-site, and what tool or software is required. If they say "let me transfer you to technical support," that's fine—as long as it happens quickly. If they guess, I stop listening.

Honestly, I'm not sure why some reps guess instead of just saying "I'll check." My best guess is they're measured on order volume, not accuracy. But for a $600 encoder that can shut down a line if it's misconfigured, a wrong guess is expensive.

One more thing from that retrofit: the specialist asked whether we had a spare mounting bracket and a calibration procedure. The general supplier's quote included neither. We saved a ton of back-and-forth by having that conversation before the PO, not after.

True RMS multimeters and the Fluke 115

The same pattern shows up with test equipment. We buy true RMS multimeters for our maintenance team, and the Fluke 115 true RMS digital multimeter is our standard unit. Fluke's published specs (fluke.com) list it as a true RMS meter rated CAT III 600 V, which covers the panels our techs work on.

A specialist distributor will ask what you're measuring. If you're troubleshooting VFDs, they'll tell you the 115 is a solid general-purpose meter but that you may want a model with more advanced motor-drive functions. A general-line supplier will quote you a price and move on.

One more thing: "how to use a Fluke multimeter" is not a trivial question for a new maintenance hire. When we onboard someone, I ask the distributor whether they can point us to training resources or a quick demo. The specialist usually has a link or a local rep who will walk through it. The general supplier sends a PDF of the manual and wishes us luck.

We've also learned to check invoicing before we order. In 2022, a new vendor offered a great price on test equipment—about 15% below our regular supplier. The spreadsheet said switch. My gut said something was off, because their answers to basic questions were vague. I ignored the gut feeling and placed a small trial order anyway. They couldn't provide a proper invoice, only a handwritten receipt. Finance rejected the expense report and I ate $1,900 from the department budget. Now I verify invoicing capability before I place any order, regardless of the price.

The test I run before any instrument order

I keep it simple. Before I place a first order with any distributor for SICK encoders or Fluke meters, I ask one technical question I already know the answer to. For encoders, it's about interface compatibility. For multimeters, it's about the safety rating and whether the meter is true RMS.

If the rep answers correctly and asks a follow-up question about my application, they pass. If they answer confidently but wrong, they're out. If they say "I don't know, let me find out," they get a second call—because that's actually the response I trust most.

This is the same logic behind why I'd rather work with a specialist who knows their limits than a generalist who overpromises. The vendor who said "we don't stock that SICK model, but here's a distributor who does" earned my trust for everything else they carried.

Where this approach doesn't work

My experience is based on roughly 150 to 200 purchase orders a year, mostly mid-range industrial gear. If you're buying encoders in volumes that justify a national framework agreement, your calculus is different—price breaks may outweigh the value of specialist support.

I've also only worked with domestic distributors. I can't speak to how these principles apply to international sourcing or to regulated industries where supplier qualification takes months regardless of how good the technical support is.

And to be fair: some general-line distributors do stock the right encoder and do have competent technical staff. The problem isn't the inventory—it's what happens when something goes wrong and you need an answer fast. A specialist has seen your problem before. A generalist is looking it up in the same catalog you are.

If you're buying a single multimeter for basic electrical checks around an office, a general supplier is probably fine. But for a SICK programmable encoder that has to talk to your PLC, or a wire draw encoder that has to survive a washdown area, the extra 5–10% you pay a specialist is way cheaper than a day of downtime.

Prices vary by volume and configuration; verify current quotes before you commit.

Sofia Lindberg

Sofia Lindberg

Sofia Lindberg is a thermal and environmental measurement analyst covering thermal imaging cameras, infrared thermometers, hygrometers, moisture meters, weather stations, and air quality meters. She uses ISO 18434-1 thermography principles and evaluates emissivity control, thermal sensitivity, spatial resolution, field of view, response time, and sensor drift. She guides reliability, building-diagnostics, and EHS teams in selecting instruments and interpreting readings without overstating what a single measurement can prove.

Ask about this topic

Turn the article into a site-specific measurement brief.

Share the device family, range, approval region and document expectation so the follow-up can stay practical.